SAE 100R1AT Singe Wire Braid Hose hydraulic hoses rubber hoses

SAE 100R1 high tensile steel wire braided medium pressure hose SAE 100R1AT single steel wire braided hoseis a typical medium pressure hydraulic hose and strongly recommended for hydraulic lines or general industrial system. High tensile strength steel wire reinforcement makes SAE 100R1 hose support higher pressure than common steel wire does. Apart from standard SAE 100R1 hose, high temp and high abrasion hydraulic hoses are supplied. They are designed to meet higher standard. Option One (high abrasion): Tube: Excellent oil resistant Nitrile; Reinforcement: single high tensile strength steel wire braid; Cover: modified nitrile; Max working pressure: 3625 psi (at 3/16"); Working temperature: -40 to +100°C (-40 to +212°C); Inside diameter: 3/16" to 2"; Pressure grating: 3045psi (at 3/16", type AT) and 3625 psi (at 3/16", type S); Safety factor: 4:1; Pressure grade: medium. Option Two (high temp): Tube: Excellent oil resistant Nitrile; Reinforcement: single high tensile strength steel wire braid; Cover: abrasion and weather resistant Chlorosulphonated Polyethylene (CSM); Max working pressure: 3625 psi (at 3/16”); Working temperature: -40 to +100°C (-40 to +212°F) or as ordered; Inside diameter: 3/16” to 2”; Pressure grating: 3045psi (at 3/16”, type AT) and 3625 psi (at 3/16”, type S); Safety factor: 4:1; Pressure grating: medium. SAE 100R1AT Medium Pressure Hydraulic Hose Part No. Metric Size Inch Size SAE Dash Size Hose I.D. Reinforcement Max. Working Pressure (Type AT) Max. Working Pressure (Type S) Min Bend Radius Weight Min Max Min Max psi bar psi bar mm kg/m MR1-3 5 3/16 -3 4.6 5.4 8.9 10.1 3045 210 3625 250 90 0.2 MR1-4 6.3 1/4 -4 6.2 7 10.6 11.7 2780 192 3260 225 100 0.25 MR1-5 8 5/16 -5 7.7 8.5 12.1 13.3 2540 175 3120 215 115 0.31 MR1-6 10 3/8 -6 9.3 10.1 14.5 15.7 2280 157 2610 180 125 0.36 MR1-8 12.5 1/2 -8 12.3 13.5 17.5 19 2030 140 2320 160 180 0.45